You can now use the DHCP Relay Agent with Routing and Remote Access to provide Dynamic Host Configuration Protocol (DHCP) scope options to dial-up clients or to virtual private network (VPN) clients. The dial-up or the VPN client will continue to receive an IP address from the Routing and Remote Access server, but it may use DHCPInform packets to obtain additional Windows Internet Naming Service (WINS) and Domain Name System (DNS) addresses, a DNS domain name, or other DHCP options. The purpose of DHCPInform messages is to obtain DHCP scope option information without getting an IP address.
Note It is particularly important that you send the DNS domain name by using DHCPInform because Point-to-Point Protocol (PPP) does not configure this information. The IPCP RFC specification that is used in PPP to negotiate IP settings between a dial-up or a VPN client and server only assigns an IP address, a primary and a secondary DNS server address, and a primary and a secondary NetBIOS/WINS server address.
DNS and WINS addresses that are received by using DHCPInform override addresses that are obtained from the Routing and Remote Access server. For additional information about how Routing and Remote Access assigns IP, DNS, and WINS settings to clients.